The Dyson V15 is a powerhouse when it comes to keeping your floors spotless, but even the most advanced vacuum needs a little TLC to keep performing at its best. One of the most important maintenance tasks is cleaning the brush bar — especially if you have pets or long hair in the household.
Here’s a simple step-by-step guide to help you clean the brush bar on your Dyson V15.
🧰 What You’ll Need:
-
A coin or flathead screwdriver
-
Scissors or seam ripper (optional, for tangled hair)
-
A dry cloth or brush
-
A replacement brush head (optional — Buy Genuine Dyson Brush Here)
🧼 Step-by-Step Cleaning Instructions:
1. Turn Off and Unplug the Vacuum
Safety first! Make sure your Dyson V15 is turned off and disconnected from the charger before you begin.
2. Detach the Brush Head
Press the red release button to remove the cleaner head from the vacuum wand. Place it on a clean surface.
3. Remove the Brush Bar
Use a coin to unlock the end cap (usually found on the side of the brush head). Pull out the brush bar carefully.
4. Clean the Brush Bar
Use your fingers or scissors to remove hair, string, or debris wrapped around the bar. Be gentle — you don’t want to damage the bristles.
5. Wipe and Inspect
Wipe the brush bar and the inside of the brush head with a dry cloth. Look for cracks, worn bristles, or broken components.
6. Reassemble the Brush Head
Slide the cleaned brush bar back in place, lock the end cap, and reattach the cleaner head to the vacuum.
🛒 Need a New Brush Bar?
If your current brush head is worn out or damaged, it may be time for a replacement.
✅ Click here to get a Genuine Dyson V15 Anti-Tangle Brush Head
💡 Pro Tip:
Clean your Dyson brush bar every 1–2 months, or more frequently if you vacuum high-traffic areas or have shedding pets.